User ID Password  
Register
 
 
AA DURASEAL WALL SEALER

AA Duraseal Alkali Resistant Wall Sealer is an acrylic water based priming wall sealer. It promotes better build and enhance adhesion to the substrate. It can be painted on bare concrete, plastered wall, ceiling and asbestos to protect the subsequent coats against the effects of alkalinity and moisture from the substrate.

SURFACE PREPARATION
The surface to be applied should be clean, sound, dry, free of grease, oil and loosely adhering particles. All cracks and damaged surfaces should be patched up with suitable filler or AA Putty Filler.

All newly plastered walls should be allowed to cure for at least 21 days before painting.

DIRECTION FOR USE

 
Stir well before use.
Apply one coat of AA Duraseal Alkali Resistant Wall Sealer before applying two coats of interior or exterior decorative finish.
Apply full strength for best results.
If thinning is necessary, add no more than 5% of water.
Allow 1 – 2 hours drying time between coats.
Replace lid firmly after use and clean the painting equipment with water.
   
  COVERAGE
1 Litre of AA Duraseal Wall Sealer covers approx. 9m² - 12m² per coat, depending on texture of surface.
AA DURALITE INTERIOR EMULSION PAINT
 
For internal use
Excellent coverage
Good opacity
Non spatter
 
AA Duralite is a superior quality copolymer emulsion paint specially formulated for decoration and protection of interior surfaces. AA Duralite dries to solid matt finish. It provides a durable coating on wall and ceiling, masonary surfaces, cement brickwork, plaster, asbestos, hard and soft boards.

SURFACE PREPARATION
Ensure the surface to be painted is clean, sound and dry, free of grease, oil and loosely adhering particles. For old and porous surfaces, apply one coat of AA Duraseal Wall Sealer. All cracks and damaged surfaces should be repaired with suitable filler or AA Putty Filler which must be allowed to dry and harden prior to painting.

DIRECTION FOR USE
 
Stir well before use
Add 5-10% of clean water if thinning is necessary
Apply paint with brush, roller or spray. For better finish, apply two or more coats. Allow 1-2 hours drying time between coats
Replace lid firmly after use and clean the painting equipment with water.
   
  COVERAGE
 

Approx 10-12m2 / ℓ depending on texture of surface

STIR WELL BEFORE USE