User ID Password  
Register
 
 
Duracem Plaster is a premixed cementitious levelling plaster specifically formulated with special chemical additives to ensure good workability, improve adhesion and enhance durability.

Duracem Plaster is ideal for levelling and smoothening uneven concrete substrates.

ADVANTAGES
Mixes and applies easily Anti-efflorescence
Consistent quality Better coverage
High durability Resistant to dirt pick-up
Good water & fungus resistance Resistant to shrinkage & surface crack
Fast curing Good adhesion to substrates
Provides high quality plaster finish    
DURACEM PLASTER BASE

Duracem Plaster Base is a high quality water resistant cementitious thin plaster specifically formulated for patching, repairing, levelling and surface improvement works to concrete and cement rendered surfaces. A hardened surface can be smoothened with Duracem Plaster Top, painted or wallpapered. It is suitable for both interior or exterior application.

PRODUCT SPECIFICATION
 
  Appearance White / Grey
  Binder Cement
  Filler Limestone / graded silica
  Additives Water soluble polymer to improve consistency, workability, water retention & adhesion
  Potlife 3 - 4 hours
  pH 12
  Density Dry : 1.2kg / ℓ    Wet : 1.6kg / ℓ
  Specific Gravity 1.88 / cm3
  Coat Thickness 2-3mm thick per layer of application
  Coverage 1.5kg / m2 / mm thick
  Water Consumption 7.5ℓ / 25kg bag
 
Adhesion to Concrete
1.2MN / m2
  Max Aggregrate Size 0.5mm
  PACKING & STORAGE
 
  Weight 25kg / bag
  Shelf Life 9 Months
  Storage Cool dry place
  APPLICATION
 
DURACEM PLASTER TOP

Duracem Plaster Top is a high quality water resistant cementitious thin plaster specifically for levelling and smooth finishing of walls and ceilings. Duracem Plaster Top can be used on Duracem Plaster Base, concrete as well as cement-rendered surfaces. A harderned plaster surface can then be painted or wall-papered.

PRODUCT SPECIFICATION
 
  Appearance Fine White / Grey Powder
  Binder Cement
  Filler Limestone
  Additives Water soluble polymer to improve consistency, workability, water retention & adhesion
  Potlife 3 - 4 hours
  pH 12
  Density Dry : 1.2kg / ℓ    Wet : 1.6kg / ℓ
  Specific Gravity 1.5 / cm3
  Coat Thickness 1-2mm thick per layer of application
  Coverage 1.2kg / m2 / mm thick
  Water Consumption 8ℓ / 25kg bag
 
Adhesion to Concrete
1.2MN / m2
  Max Aggregrate Size 0.25mm
  PACKING & STORAGE
 
  Weight 25kg / bag
  Shelf Life 9 Months
  Storage Cool dry place
  APPLICATION
 
DURACEM PLASTER 2 IN 1

Duracem Plaster 2 in 1 is a high quality water resistant cementitious thin plaster specifically formulated for levelling and surface improvement works to concrete and cement-rendered surfaces in a single coat. A hardened plaster can be painted or wall-papered. It is suitable for both interior or exterior application.

PRODUCT SPECIFICATION
 
  Appearance Fine White / Grey Powder
  Binder Cement
  Filler Limestone / graded silica sand
  Additives Water soluble polymer to improve consistency, workability, water retention & adhesion
  Potlife 3 - 4 hours
  pH 12
  Density Dry : 1.2kg / ℓ    Wet : 1.6kg / ℓ
  Specific Gravity 1.5 / cm3
  Coat Thickness 2-3mm thick per layer of application
  Coverage 1.5 kg / m2 / mm thick
  Water Consumption 8ℓ / 25kg bag
 
Adhesion to Concrete
1.2MN / m2
  Max Aggregrate Size 0.5mm
  PACKING & STORAGE
 
  Weight 25kg / bag
  Shelf Life 9 Months
  Storage Cool dry place
  ADVANTAGES
 
Mixes & applies easily
Fast curing
High durability
Anti-efflorescence
Good water resistance
Better coverage
Contain anti-fungus properties
Resistant to dirt pick-up
Consistent finish surface quality
Resistant to shrinkage and surface crack
  APPLICATION
 
  SUPER RENDER (PLASTER 3 IN 1)
Cap Matahari Super Render is a high quality cementitious render specially formulated for brick walls, hollowblock walls and concrete surfaces. It is intended to replace conventional cement-sand render. It is suitable for interior or exterior wall plastering and for brick laying purposes.

MIXING AND APPLICATION
Remove loose particles, grease and traces of foreign materials that may affect adhesion. Dry absorbent surfaces should be moistened before application of Super Render. Mix 1 bag (25kg) of Super Render with approximately 7.5L of water and mix thoroughly with an electric mixer or drum mixer for 3-7 minutes until the desired homogeneous paste is achieved. Use the mixture within 1 hour of mixing.